PURITY Quell ST/PURITY Quell GY pressure vessel lid with display unit
For PURITY 450/600 Quell ST For PURITY 1200 Quell ST
Item no. 272000 Item no. 272400
PURITY Quell ST/PURITY Quell GY pressure vessel lid without display unit
For PURITY 450/600 Quell ST For PURITY 1200 Quell ST
Item no. 272100 Item no. 272500
PURITY Steam pressure vessel lid with display unit
For PURITY 450/600 Steam For PURITY 1200 Steam
Item no. 1004331 Item no. 1004328
PURITY Steam pressure vessel lid without display unit
For PURITY 450/600 Steam For PURITY 1200 Steam
Item no. 1001484 Item no. 1001461
PURITY Clean/Clean Extra pressure vessel lid without display unit
For PURITY 1200 Clean/Clean Extra
Item no. 273825
PURITY cover
1 set of transparent plastic covers (5 units) For protection of filter head against dust, water and contamination
Item no. 321600
PURITY display
Digital display unit—placed on the pressure vessel lid equipped with electronics.
Item no. 321300
Knockout bracket with step lugs
For PURITY 450/600 For PURITY 1200
Item no. 315757 Item no. 315758
Handle set
For PURITY 450/600 For PURITY 1200 Comprises 1x blue cladding grip, 2x blue lid handles and 4x mounting screws
Item no. 321400 Item no. 321500
Flush valve
Flush valve with stop valve and flush hose, 550 mm, grey, plastic
Item no. 321700
Sealing set I
Contains 3x ¾'' flat seals, 2x 3/8'' flat seals and 2x O-rings (1'' and ¾'' for inlet/outlet of filter head)
Item no. 321800
Remote display
The remote display module should be mounted in a clearly visible location on the wall. In this way, all filter operating parameters are visible at all times.
Item no. 274100
FlowMeter 100–700 A
Calculates the residual filter capacity after inputting the relevant filter capacity and by recording the volumetric flow.
Item no. 298905
Universal wall mounting bracket
Made from stainless steel with safety chain for secure mounting of your PURITY filters on the wall Dimensions (W/H/D): 24 cm/43.3 cm/24 cm
Item no. 234000
Elbow connector
3/4''–¾'' for convenient affixing of rigid pipes
Item no. 315648
PURITY multi-size cover
1 set of transparent plastic covers (10 units) For protecting the filter head and handles against dust, water and contamination
Item no. 321602
FlowMeter 10–100 A
For PURITY C50/150/300 Calculates the residual filter capacity after inputting the relevant filter capacity and by recording the volumetric flow.
Item no. 298900
FlowMeter 100–700 A
For PURITY C500 Calculates the residual filter capacity after inputting the relevant filter capacity and by recording the volumetric flow.
Item no. 298905
Step lug
Pack of 3 For PURITY C50/150/300 Quell ST
Item no. 1000494
Cover
Pack of 10 For protection of PURITY C filter head from dust, water and contamination
Item no. 1000503
Non-return valve
Pack of 3 Connections 3/8''
Item no. 1000639
Non-return valve JG8 with circlips
Pack of 3
Item no. 292069
Reducer set
Pack of 2 ¾'' external thread–3/8'' internal thread
Item no. 1000898
Wall mounting backet
Mounting for attaching filter to wall
Item no. 1000480
Other accessories
Carbonate hardness test kit
The local carbonate hardness must be identified before any BRITA water filter system is commissioned.
Item no. 710800
Total hardness test kit
For additional determination of local total hardness, e.g. prior to installation of a PURITY Clean Extra
Item no. 536754
Total and carbonate hardness test kit
Carbonate and total hardness test combined in a set